LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2007 >> Relay 3.9 W >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Lock Control System >> Repair Instructions >> Automatic Transmission Shift Lock Actuator Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Shift Lock Actuator Electrical Connector
    GM1538451Courtesy of GENERAL MOTORS CORP.
  1. Install the shift lock actuator (2) to the linear shift assembly.
    2. NOTE: Refer to Fastener Notice .
  2. Install the shift lock actuator screws (3).

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  3. Connect the shift lock actuator electrical connector (1).
    4. Fig 2: Identifying Linear Shift Assembly Bolt/Holes
    GM1538450Courtesy of GENERAL MOTORS CORP.
  4. Rotate the linear shift assembly (2) up to align the linear shift assembly bolt holes.
    5. Fig 3: View Of Shift Lock Actuator Linear Shift Front Bolts
    GM1538449Courtesy of GENERAL MOTORS CORP.
  5. Install the linear shift front bolts (2).

    Tighten:  Tighten the bolts (1, 2) to 10 N.m (89 lb in).

  6. Install the steering column. Refer to Steering Column Replacement .
  7. Install the trim covers to the steering column. Refer to Steering Column Trim Covers Replacement .
scientia non olet · About LEMON Manuals