Battery Replacement

Battery Replacement

Removal Procedure

Caution: Refer to Battery Disconnect Caution (Battery Disconnect Caution) .




1. Disconnect the battery.

* Disconnect the negative cable.
* Disconnect the positive cable.

2. Remove the battery holder (1).
Remove the bolt.
3. Remove the battery.



Installation Procedure

1. Install the battery.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the battery holder.

Tighten the bolt to 7 N.m (62 lb in).

3. Connect the battery.

* Connect the positive cable.
* Connect the negative cable.

4. For programming procedures, refer to Control Module References (Programming and Relearning) .