Instrument Cluster Programming and Setup

Instrument Cluster Programming and Setup

Instrument Panel Cluster (IPC) Programming and Setup

When the IPC is replaced, the following procedures must be performed:

1. With a scan tool, perform the Reset ECU function before removing the IPC.
2. Replace the instrument panel cluster (IPC).
3. The odometer information must be programmed to the replacement instrument panel cluster (IPC). The odometer information has to be programmed in the new IPC using IPC SETUP in Service Programming System (SPS) (Programming and Relearning) .
4. With a scan tool, perform the Program ECU function and follow the screen prompts.