Removal Procedure
- Remove the front floor console. Refer to Front Floor Console Replacement .
- Remove the selector linkage (2) from the selector lever.
- Remove the retaining clamp (1).
- Disconnect the selector lever from the bracket.
- Remove the selector lever assembly.
- Disconnect the wiring harness plug (1).
- Remove the 4 bolts (2).
- Remove the selector lever assembly.
- Remove the lock control solenoid selector lever lock (2).
- Disconnect the 2 wiring plugs (1) from the lock control solenoid.
- Remove the 2 bolts (3).
- Remove the lock control solenoid from the selector lever lock.
IMPORTANT: Note the configuration of cables.