Power Mirror Replacement

Power Mirror Replacement

Removal Procedure




1. Remove the upper extension trim panel.
2. Release the 3 clips.
3. Disconnect the wiring harness plug.




4. Remove the front door outer mirror.

1. Disconnect the wiring harness plug.
2. Remove the 3 bolts.
3. Remove the outer mirror.

Installation Procedure

Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the front door outer mirror.

Tighten the 3 bolts to 5 Nm (44 lb in).

2. Connect the wiring harness plug.
3. Install the outer mirror inner paneling.
4. Connect the wiring harness plug.
5. Install the 3 clips.
6. Perform the operational inspection.