LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2009 >> Sky Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Data Communication System >> Diagnostic Information and Procedures >> Scan Tool Does Not Power Up >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

  1. Ignition OFF, test for less than 5 ohm between terminal 4 at the data link connector (DLC) and ground.
    • If greater than the specified value, test the ground circuit for an open/high resistance.
  2. Ignition OFF, test for less than 5 ohm between the DLC terminal 5 and ground.
    • If greater than the specified value, test the ground circuit for an open/high resistance.
  3. Ignition ON, test for B+ between the DLC terminals 16 and ground.
    • If not the specified value, test the B+ circuit for a short to ground or an open/high resistance.
  4. If all circuits test normal, refer to the scan tool user guide.
scientia non olet · About LEMON Manuals