LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2009 >> Sky Red Line, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.0L - Introduction >> Repair Instructions >> Intake Air Pressure and Temperature Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Intake Air Pressure And Temperature Sensor
    GM1829737Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the intake air pressure and temperature sensor O-ring with clean engine oil.
  2. Install the intake air pressure and temperature sensor.
    3. CAUTION: Refer to Fastener Caution .
  3. Install the intake air pressure and temperature sensor bolts and tighten to 2.5 N.m (22 lb in).
    4. Fig 2: Identifying Intake Air Pressure And Temperature Sensor Electrical Connector
    GM1826861Courtesy of GENERAL MOTORS CORP.
  4. Connect the engine wiring harness electrical connector (2) to the intake air pressure and temperature sensor.
scientia non olet · About LEMON Manuals