Removal Procedure

WARNING: Fuel Vapors can collect while servicing fuel system parts in enclosed areas such as a trunk. To reduce the risk of fire and increased exposure to vapors:

Use forced air ventilation such as a fan set outside of the trunk.
Plug or cap any fuel system openings in order to reduce fuel vapor formation.
Clean up any spilled fuel immediately.
Avoid sparks and any source of ignition.
Use signs to alert others in the work area that fuel system work is in process.

Fig 1: Identifying Locking Tabs

Courtesy of GENERAL MOTORS CORP.

Remove the fuel pump module. Refer to Fuel Pump Module Replacement .
Using two flat-bladed tools, carefully pull both locking tabs (1) outward while simultaneously lifting the level sensor.

Fig 2: Identifying Electrical Terminals

Courtesy of GENERAL MOTORS CORP.

Using a small bladed tool, push in the electrical terminals (1) while simultaneously pulling out.