LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2010 >> Sky Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.4L - Repair Instructions >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Fuel Tank Pressure Sensor
    GM1594372Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel tank pressure sensor (2).
    2. Fig 2: Identifying Fuel Tank Sensors Electrical Connectors
    GM1594359Courtesy of GENERAL MOTORS CORP.
  2. Connect the fuel tank pressure sensor electrical connector (5).
    3. Fig 3: View Of Fuel Pump Module Unit Access Cover
    GM1594369Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  3. Install the fuel pump module access cover.
  4. Install the access cover bolts and tighten to 10 N.m (89 lb in).
  5. Install the rear compartment trim panel. Refer to Rear Compartment Trim Panel Replacement (Convertible) .
scientia non olet · About LEMON Manuals