Removal Procedure
Courtesy of GENERAL MOTORS CORP.
- Disconnect the engine wiring harness electrical connector (1) from the mass air flow (MAF) sensor.
Courtesy of GENERAL MOTORS CORP.
- Loosen the air cleaner outlet duct clamp (1) at the air cleaner housing.
- Remove the air cleaner outlet duct from the air cleaner housing.
Courtesy of GENERAL MOTORS CORP.
- Unlatch the upper air cleaner cover retainer clips.
- Remove the upper air cleaner cover.
- Remove the air cleaner filter from the lower air cleaner housing.
- Inspect the air cleaner filter for dust, dirt, and water contamination. Replace as necessary. Refer to Maintenance Schedule (North American Emissions)
.