Removal Procedure
Courtesy of GENERAL MOTORS CORP.
- Disconnect the engine wiring harness electrical connector (2) from the front knock sensor, if required.
Courtesy of GENERAL MOTORS CORP.
- Disconnect the engine wiring harness electrical connector (2) from the rear knock sensor, if required.
Courtesy of GENERAL MOTORS CORP.
- Remove the front knock sensor clip (1) from the oil level indicator tube, if required.
- Remove the rear knock sensor clip (2) from the intake manifold brace, if required.
Courtesy of GENERAL MOTORS CORP.
- Loosen the appropriate knock bolt.
- Remove the appropriate knock sensor.