LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2010 >> Sky Red Line, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.0L - Repair Instructions >> Repair Instructions >> Fuel Feed Intermediate Pipe Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: View Of Intake CMP Sensor & Air Inlet Screen Support
    GM1826449Courtesy of GENERAL MOTORS CORP.
  1. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement (SKY) or Air Inlet Grille Panel Replacement (Solstice) .
  2. Remove the air inlet screen support nuts and support.
    3. Fig 2: Identifying High Pressure Fuel Pump Connector & Clip
    GM1826282Courtesy of GENERAL MOTORS CORP.
  3. Relieve the high side fuel system pressure. Refer to Fuel Pressure Relief (Low Pressure without Special Tool)  or Fuel Pressure Relief (Low Pressure with CH 48027)  or Fuel Pressure Relief (Low Pressure Side with CH 48027-100)  or Fuel Pressure Relief (High Pressure Side) .
  4. Disconnect the engine wiring harness electrical connector (1) from the high pressure fuel pump.
  5. Remove the engine wiring harness clip (3) from the high pressure fuel pump cover.
    6. Fig 3: View Of High Pressure Fuel Pump Cover & Bolts
    GM1826280Courtesy of GENERAL MOTORS CORP.
  6. Remove the high pressure fuel pump cover bolts.
  7. Remove the high pressure fuel pump cover.
    8. Fig 4: View Of High Pressure Fuel Pump Insulator
    GM1829002Courtesy of GENERAL MOTORS CORP.
  8. Remove the high pressure fuel pump insulator.
    9. Fig 5: View Of High Pressure Fuel Pipe
    GM1828941Courtesy of GENERAL MOTORS CORP.
  9. Loosen the high pressure fuel pipe fitting at the fuel pump.
  10. Loosen the high pressure fuel pipe fitting at the fuel rail.
  11. Remove and discard the high pressure fuel pipe.
scientia non olet · About LEMON Manuals