LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Saturn >> 2010 >> Sky Red Line, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.0L - Repair Instructions >> Repair Instructions >> Fuel Tank Filler Pipe Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Fill Pipe Components
    GM1594365Courtesy of GENERAL MOTORS CORP.
  1. Remove the cover and/or plug from the fuel tank opening and the EVAP line.
  2. Install the fuel fill pipe hose assembly.
    3. CAUTION: Refer to Fastener Caution .
  3. Tighten the fuel fill pipe hose clamp (1) at the fuel tank to 4.5 N.m (40 lb in).
  4. Connect the fuel tank fill EVAP line quick connect fitting (3). Refer to Plastic Collar Quick Connect Fitting Service .
  5. Install the fill pipe ground strap bolt (2) and tighten to 9 N.m (80 lb in).
    6. Fig 2: View Of Fill Pipe Housing
    GM1594362Courtesy of GENERAL MOTORS CORP.
  6. Install the rear wheelhouse liner. Refer to Rear Wheelhouse Panel Liner Replacement .
  7. Install the fuel fill pipe housing.
  8. Install the fuel fill pipe housing bolts and tighten to 1.5 N.m (13 lb in).
    9. Fig 3: View Of Fuel Pump Module Unit Access Cover
    GM1594369Courtesy of GENERAL MOTORS CORP.
  9. Install the pump module access cover.
  10. Install the fuel pump module access cover bolts and tighten to 10 N.m (89 lb in).
  11. Install the rear compartment trim panel. Refer to Rear Compartment Trim Panel Replacement (Convertible) .
scientia non olet · About LEMON Manuals