Generator Specifications
GENERATOR SPECIFICATIONS
| Application | Specification | ||||
|---|---|---|---|---|---|
| Brush Length | |||||
| Standard | .374-.453 Inches (9.5-11.5 mm) | ||||
| Limit (Minimum) | More Than .177 Inches (4.5 mm) | ||||
| Rotor | |||||
| Resistance (1) | 2.1-2.5 ohms | ||||
| Slip Ring Diameter | |||||
| Standard | .559-.567 Inches (14.2-14.4 mm) | ||||
| Minimum | .504 Inches (12.8 mm) | ||||
| Generator Regulated Output | |||||
| Amperage | |||||
| Without Load | 10 Or Less Amps | ||||
| With Load | 30 Or More Amps | ||||
| Voltage | 12.9-14.9 Volts | ||||
|
|||||