Inspection Procedure

1. Reset the power window regulator motor (See INITIALIZATION ).
2. Check if the power window AUTO UP/DOWN function operates normally.

   OK: AUTO UP/DOWN function operates normally. 

NG: OTHER PROBLEM (See  PROBLEM SYMPTOMS TABLE   ) 

OK: GO TO NEXT STEP 

1. Check that the jam protection function operates normally (See ON-VEHICLE INSPECTION ).

HINT:

The jam protection function does not operate from the fully closed position of the door glass to 4 mm (0.16 in.) below that.

NG: REPLACE POWER WINDOW REGULATOR SWITCH ASSY 

OK: END