Engine Control System: ECM: Replacement
- REMOVE GLOVE COMPARTMENT DOOR ASSY (See REPLACEMENT )
- REMOVE ECM
- Disconnect the 4 ECM connectors.
- Remove the 2 bolts, then remove the ECM.
- Remove the 2 screws and ECM bracket from the ECM.
- Remove the 2 screws and ECM bracket No. 2 from the ECM.
- Remove the 2 screws and ECM bracket No. 3 from the ECM.
- INSTALL ECM
Torque: 3.0 N.m (31 kgf.cm, 27 in.lbf)
- INSTALL GLOVE COMPARTMENT DOOR ASSY (See REPLACEMENT )