Inspection Procedure
- POWER WINDOW REGULATOR MOTOR ASSEMBLY (LH AND RH)
- Reset the power window regulator motor (see INITIALIZATION ).
- Check if the power window AUTO UP/DOWN function operates normally.
OK: AUTO UP/DOWN function operates normally.
NG : OTHER PROBLEM
OK: Go To Next Step
- CHECK JAM PROTECTION FUNCTION OPERATING RANGE
- Check that the jam protection function operates normally (see ON-VEHICLE INSPECTION
).
HINT:
The jam protection function does not operate from the fully closed position of the door glass to 4 mm (0.16 in.) below that.
NG : REPLACE POWER WINDOW REGULATOR SWITCH ASSEMBLY (LH AND RH)
OK : END
- Check that the jam protection function operates normally (see ON-VEHICLE INSPECTION
).