Service Data
2AZ-FE ENGINE CONTROL SYSTEM SERVICE DATA SPECIFICATION
| Mass air flow meter : Standard resistance (4 (THA) - 5 (E2)) |
13.6 to 18.4 kΩ at -20 °C (-4°F) 2.21 to 2.69 kΩ at 20 °C (68°F) 0.493 to 0.667 kΩ at 60°C (140°F) |
| Camshaft timing oil control valve : Standard resistance (1 (+B) - 2 (GND)) |
6.9 to 7.9 kΩ at 20 °C (68°F) |
| Camshaft position sensor : Standard resistance (1 (G+) - 2 (G-)) |
835 to 1, 400 Ω at cold 1, 060 to 1, 645 Ω at hot |
| Crankshaft position sensor : Standard resistance (1 (Ne+) - 2 (Ne-)) |
985 to 1, 600 Ω at cold 1, 265 to 1, 890 Ω at hot |
| Engine coolant temperature sensor : Standard resistance (1 (E2) - 2 (THW)) |
2.32 to 2.59 kΩ at 20 °C (68°F) 0.310 to 0.326 kΩ at 80°C (176°F) |
| Throttle body : Standard resistance (1 (M-) - 2 (M+) |
0.3 to 100 kΩ at 20 °C (68°F) |
| Knock sensor : Standard resistance (1 (Ground) - 2 (Output) |
120 to 280 kΩ at 20 °C (68°F) |
| Accelerator pedal (ACCEL POS #1) : Standard voltage |
0.5 to 1.1 V (accelerator pedal released) 2.5 to 4.5 V (accelerator pedal depressed) |
| Accelerator pedal (ACCEL POS #2) : Standard voltage |
1.2 to 2.0 V (accelerator pedal released) 3.4 to 5.0 V (accelerator pedal depressed) |