Engine Control System (1NZ-FE): ECM: Installation
- INSTALL ECM
- Install the No. 3 ECM bracket with the 2 screws.
- Install the No. 2 ECM bracket with the 2 screws.
- Install the ECM bracket with the 2 screws.
- Install the ECM with the 2 bolts.
Torque: 3.0 N*m (31 kgf*cm, 27 in.*lbf)
- Connect the 4 ECM connectors.
- INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (See INSTALLATION )
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- PERFORM INITIALIZATION
- Perform initialization (see INITIALIZATION
).NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
- Perform initialization (see INITIALIZATION
).