LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2006 >> xA Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (1NZ-FE) >> Idle Air Control Valve >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Idle Air Control Valve: Installation

  1. INSTALL IDLE AIR CONTROL VALVE ASSEMBLY 
    1. Install a new gasket and the valve with the 3 screws.

      Torque: 3.4 N*m (35 kgf*cm, 30 in.*lbf) 

  2. INSTALL THROTTLE BODY ASSEMBLY 
    1. Install the throttle body (see INSPECTION  ).
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    Fig 1: Installing Idle Air Control Valve
    G04153221Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals