LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2006 >> xB Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (1NZ-FE) >> Camshaft Position Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Installation

  1. INSTALL CAMSHAFT POSITION SENSOR 
    1. Install the sensor with the bolt.

      Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) 

      Fig 1: Installing Sensor With Bolt
      G04225726Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the sensor connector.
      Fig 2: Connecting Sensor Connector
      G04225727Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. CONNECT ENGINE WIRE 
    1. Connect the 2 clamps of the engine wire.
      Fig 3: Connecting Clamps Of Engine Wire
      G04225728Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL AIR CLEANER ASSEMBLY (See  INSTALLATION   ) 
  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
scientia non olet · About LEMON Manuals