Engine Control System (1NZ-FE): ECM: Installation

INSTALL ECM
1. Install the No. 3 ECM bracket with the 2 screws.
2. Install the No. 2 ECM bracket with the 2 screws.
3. Install the ECM bracket with the 2 screws.
4. Install the ECM with the 2 bolts.
  Torque: 3.0 N*m (31 kgf*cm, 27 in.*lbf)
5. Connect the 4 ECM connectors.
INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL