Service Data
2AZ-FE STARTING - SERVICE DATA
| Starter assembly | Standard current | 90 A or less at 11.5 V | |
| Starter relay | Standard resistance | 3-5 | 10 kΩ or higher |
| 3-5 | Below 1 Ω (When battery voltage is applied to terminals 1 and 2) | ||
| Ignition switch | Standard resistance | - | 10 kΩ or higher |
| 2(AM1)-3(ACC) | Below 1 Ω at ACC | ||
| 2(AM1)-3(ACC) | Below 1 Ω at ON | ||
| 3(ACC)-4(IG1) | Below 1 Ω at ON | ||
| 7 (AM2) - 6 (IG2) | Below 1 Ω at ON | ||
| 2(AM1)-4(IG1) | Below 1 Ω at START | ||
| 4(IG1)-1(ST1) | Below 1 Ω at START | ||
| 7 (AM2) - 6 (IG2) - 8 (ST2) | Below 1 Ω at START | ||
| Starter magnetic switch assembly | Standard resistance | 50-C | Below 1 Ω |
| 50 - Body | Below 2 Ω | ||
| Starter armature assembly | Standard resistance | Segment | Below 1 Ω |
| Segment - Coil core | 10 kΩ or higher | ||
| Starter armature assembly | Commutator depth | Standard | 3.1 mm (0.354 in.) |
| Maximum | 3.8 mm (0.150 in.) | ||
| Starter commutator end frame | Brush length | Standard length | 9.0 mm (0.354 in.) |
| Maximum length | 4.0 mm (0.158 in.) | ||
| Standard resistance | Positive (+) - Negative (-) | 10 kΩ or higher | |
| Snap ring | Maximum length | 4.0 mm (0.158 in.) | |