Problem Symptoms Table
HINT:
Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Seat belt warning system
SEAT BELT WARNING SYSTEM PROBLEM SYMPTOMS REFERENCE CHART
| Symptom | Suspected Area | See page |
|---|---|---|
| Driver seat belt warning light does not blink | 1. MET IG2 FUSE | |
| 2. Combination meter assembly | DATA LIST / ACTIVE TEST | |
| 3. FRONT SEAT INNER BELT ASSEMBLY LH | ||
| 4. Wire harness | - | |
| Passenger seat belt warning light does not blink | 1. GAUGE FUSE | |
| 2. AM1 FUSE | ||
| 3. IG1 RELAY | ||
| 4. A/C CONTROL ASSEMBLY | ||
| 5. Combination meter assembly | DATA LIST / ACTIVE TEST | |
| 6. Occupant deletion sensor | OCCUPANT CLASSIFICATION SYSTEM | |
| 7. FRONT SEAT INNER BELT ASSEMBLY RH | ||
| 8. Wire harness | - |