Removal & Installation
WARNING: This page is about the tC Base, Automatic, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 6.4 | 5.3 | C | ||
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| 0.2 | C | |||
| Combination Procedure: CONVERTER SEAL: Remove & Replace: | ||||
| w/Converter Removed | 0.2 | B | ||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| Rear | 0.4 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.2 | C | |||
| Combination Procedure: OUTPUT SEAL: Remove & Replace: | ||||
| Both | 0.4 | B | ||
| One Side | 0.2 | B | ||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.1 | C | |||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| Includes: Programming. | 0.8 | C | ||
| Combination Procedure: TRANSAXLE OIL COOLER: Clean: | ||||
| 0.5 | C | |||