LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2007 >> tC Spec, Automatic >> Repair and Diagnosis >> General Information >> Computer Relearn >> Engine Control System (2AZ-FE) >> SFI System >> DTC P0604 Internal Control Module Random Access Memory (RAM) Error >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

  1. CHECK OTHER DTC OUTPUT (IN ADDITION TO DTC P0604) 
    1. Connect the intelligent tester to the DLC3.
    2. Turn the ignition switch to the ON position.
    3. Turn the tester on.
    4. Clear the DTC.
    5. Turn the ignition switch off.
    6. Disconnect the battery negative terminal and wait for 1 minute.
    7. Connect the battery negative terminal.
    8. Turn the ignition switch to the ON position.
    9. Enter the following menus: DIAGNOSIS / ENHANCED / DTC INFO / CURRENT CODES.
    10. Read the DTCs.

      Result 

      DTC RESULT REFERENCE

      Display (DTC output) Proceed to
      P0604 A
      No output DTC B

    B: CHECK FOR INTERMITTENT PROBLEMS 

    A: REPLACE ECM (See  REMOVAL  )

scientia non olet · About LEMON Manuals