LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2008 >> tC Base, Automatic >> Repair and Diagnosis >> Engine Performance >> 2AZ-FE Engine Control System >> Camshaft Timing Oil Control Valve Assembly >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Timing Oil Control Valve Assembly: Installation

  1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY 
    1. Apply a light coat of engine oil to the O-ring of the oil control valve.
      Fig 1: Identifying O-Ring
      G05183804Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the oil control valve with the bolt.

      Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf) 

      NOTE: Make sure that the O-ring is not cracked or jammed.
      3. Fig 2: Identifying Oil Control Valve Connector With Bolt
      G05539177Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Connect the oil control valve connector.
  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  3. CHECK FOR ENGINE OIL LEAKS 
    1. Start the engine, and check that there are no oil leaks.
  4. INSTALL ENGINE COVER  (See INSTALLATION  )
  5. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals