LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2008 >> tC Base, Automatic >> Repair and Diagnosis >> Engine Performance >> 2AZ-FE Engine Control System >> Camshaft Timing Oil Control Valve Assembly >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Timing Oil Control Valve Assembly: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE ENGINE COVER  (See REMOVAL  )
  3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY 
    1. Disconnect the oil control valve connector.
      2. Fig 1: Identifying Oil Control Valve Connector With Bolt
      G05539177Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and oil control valve.
scientia non olet · About LEMON Manuals