LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2008 >> tC Base, Automatic >> Repair and Diagnosis >> Engine Performance >> 2AZ-FE Engine Control System >> ECM >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

2AZ-FE Engine Control System: ECM: Installation

  1. INSTALL ECM 
    1. Install the ECM with the bolt and screw.

      Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf) 

      Fig 1: Identifying ECM Connector With Bolt And Screw
      G05539216Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the 4 ECM connectors.
      3. Fig 2: Identifying ECM Connectors And Wire Harness Clamps
      G05539215Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Install the wire harness clamp.
  2. INSTALL GLOVE COMPARTMENT DOOR  (See INSTALLATION )
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  4. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals