Front Seat Inner Belt Assembly: Installation

HINT:

• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.
• A bolt without a torque specification is shown in the standard bolt chart (See SPECIFIED TORQUE FOR STANDARD BOLTS ).

1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH 
   1. Install the inner belt with the nut.

      Torque: 42 N*m (428 kgf*cm, 31 ft.*lbf) 

   2. Attach the 5 claws.
   3. Connect the 3 connectors.
2. INSTALL FRONT SEAT ASSEMBLY LH  (See INSTALLATION )
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
4. PERFORM INITIALIZATION 
   1. Perform initialization (See INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.