LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2008 >> tC Base, Standard >> Repair and Diagnosis >> Engine Performance >> 2AZ-FE Engine Control System >> Camshaft Position Sensor >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Inspection

  1. INSPECT CAMSHAFT POSITION SENSOR 
    1. Measure the resistance of the sensor.

      Standard resistance 

      RESISTANCE SPECIFIED CONDITIONS

      Tester Connection Specified Condition
      1 (G+) - 2 (G-) 835 to 1,400 Ω at cold
      1(G+) -2 (G-) 1,060 to 1,645 Ω at hot
      Fig 1: Identifying Resistance Between Camshaft Position Sensor Terminals
      G04973356Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE: Cold and Hot mean the temperature of the coils themselves. Cold is from -10 to 50°C (14 to 122°F) and Hot is from 50 to 100°C (122 to 212°F).

      If the result is not as specified, replace the camshaft position sensor.

scientia non olet · About LEMON Manuals