Service Data
2AZ-FE ENGINE CONTROL SYSTEM - SERVICE DATA
| MASS Air flow meter | Standard | Less than 0.48 g/sec | |
| Camshaft timing oil control valve assembly | Standard resistance | 6.9 to 7.9 Ω at 20°C (68°F) | |
| Camshaft position sensor | Standard resistance | 835 to 1400 Ω at cold 1060 to 1645 Ω at hot | |
| Crankshaft position sensor | Standard resistance | 985 to 1600 Ω at cold 1265 to 1890 Ω at hot | |
| Throttle with motor body assembly | Standard resistance | 1 (M-) - 2 (M+) | 0.3 to 100 Ω at 20°C (68°F) |
| EFI (20A) fuse | Standard resistance | T2 - T6 | Below 1 Ω |
| Knock sensor | Standard resistance | 120 to 280 kΩ at 20°C (68°F) | |
| Integration relay | B1 - C1 | Below 1 Ω | |
| B5 - B8 | 10 kΩ or higher | ||
| B1 - B4 | 10 kΩ or higher | ||
| B1 - B4 | Below 1 Ω (Apply battery voltage between terminals B6 and B7) | ||
| B4 - C1 | Below 1 Ω (Apply battery voltage between terminals B6 and B7) | ||
| A1 - A4 | 10 kΩ or higher | ||
| Below 1 Ω (When battery voltage applied to terminals B2 and B3) | |||
| ACCEL POS # 1 | Standard voltage | Accelerator pedal released | 0.5 to 1.1 V |
| Accelerator pedal depressed | 2.6 to 4.5 V | ||
| ACCEL POS # 2 | Standard voltage | Accelerator pedal released | 1.2 to 2.0 V |
| Accelerator pedal depressed | 3.4 to 5.0 V | ||
| Engine coolant temperature sensor | Standard resistance | 1 - 2 | 2.32 to 2.59 kΩ at 20°C (68°F) |
| 0.310 to 0.326 kΩ at 80°C (176°F) | |||
| No. 1 ignition relay | Standard resistance | 3 - 5 | 10 kΩ or higher |
| Below 1 Ω (When battery voltage applied to terminals 1 and 2) | |||
| Air fuel ratio sensor | Standard resistance | 2 (+B) - 1 (HT) | 1.8 Ω to 3.4 Ω at 20°C (68°F) |
| 2 (HT) - 1 (AR) | 10 kΩ or higher | ||
| Heated oxygen sensor | Standard resistance | 1 (HMB) - 2 (+B) | 11 Ω to 16 Ω at 20°C (68°F) |
| 1 (HMB) - 4 (E2) | 10 kΩ or higher | ||