LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2008 >> xD Automatic >> Repair and Diagnosis >> Engine Performance >> 2ZR-FE Engine Control System >> Air Fuel Ratio Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Air Fuel Ratio Sensor: Removal

  1. REMOVE FRONT WIPER ARM HEAD CAP  (See REMOVAL )
  2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH  (See REMOVAL )
  3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH  (See REMOVAL )
  4. REMOVE HOOD TO COWL TOP SEAL  (See REMOVAL )
  5. REMOVE COWL TOP VENTILATOR LOUVER RH  (See REMOVAL )
  6. REMOVE COWL TOP VENTILATOR LOUVER LH  (See REMOVAL )
  7. REMOVE FRONT WIPER MOTOR AND LINK  (See REMOVAL )
  8. REMOVE FRONT AIR SHUTTER SEAL RH  (See REMOVAL )
  9. REMOVE COWL TOP PANEL OUTER  (See REMOVAL )
  10. REMOVE NO. 2 CYLINDER HEAD COVER  (See REMOVAL )
  11. REMOVE AIR FUEL RATIO SENSOR 
    1. Disconnect the air fuel ratio sensor connector and clamp.
      Fig 1: Locating Air Fuel Ratio Sensor Connector And Clamp
      G05398800Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using SST, remove the air fuel ratio sensor.

      SST 09224-00010 

      Fig 2: Removing Air Fuel Ratio Sensor
      G05398801Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals