LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2008 >> xD Automatic >> Repair and Diagnosis >> Engine Performance >> 2ZR-FE Engine Control System >> Ignition Relay No. 1 >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Relay No. 1: Inspection

  1. INSPECT NO. 1 IGNITION RELAY 
    1. Check the resistance.
      1. Measure the resistance according to the value (s) in the table below.

        Standard resistance 

        RESISTANCE SPECIFICATION

        Tester Connection Condition Specified Condition
        3 - 5 When battery voltage applied to terminals 1 and 2 Below 1 Ω
        When battery voltage absent 10 kΩ or higher
        Fig 1: Identifying No 1 Ignition Relay Connector Terminals
        G04829441Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        If the result is not as specified, replace the ignition relay.

scientia non olet · About LEMON Manuals