Inspection Procedure
- CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0111)
- Connect a Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the tester ON.
- Select the following menu items: Powertrain / Engine and ECT / Trouble Codes.
- Read DTCs.
Result
RESULT REFERENCEResult Proceed to P0111 and other DTCs A P0111 B HINT:
If any DTCs other than P0111 are output, troubleshoot those DTCs first.
B : REPLACE MASS AIR FLOW METER (See REMOVAL )
A: Go to DTC CHART (See DIAGNOSTIC TROUBLE CODE CHART )