Customize Parameters

CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Connect a Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the tester on.
Enter the following menus: Utility / Customize /

Select the setting by referring to the table below.

Warning

TESTER DISPLAY

Tester Display	Default	Contents	Setting
D-Seatbelt Warning Buzzer	ON	Seat belt warning buzzer ON / OFF setting	ON Driver buzzer ON OFF Driver buzzer OFF
P-Seatbelt Warning Buzzer	ON	Seat belt warning buzzer ON / OFF setting	ON Passenger buzzer ON OFF Passenger buzzer OFF

HINT:

When the buzzer OFF setting is selected, the buzzer activation while the vehicle is being driven is cancelled. However, the buzzer activation when the ignition switch is turned to ON cannot be cancelled.