Camshaft Position Sensor: Installation

INSTALL CAMSHAFT POSITION SENSOR
1. Apply a light coat of engine oil to the O-ring on the camshaft position sensor.
  
  Fig 1: Locating O-Ring On Camshaft Position Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the camshaft position sensor with the bolt (for intake camshaft side).
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  Fig 2: Locating Camshaft Position Sensor Bolt (For Intake Camshaft Side)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the camshaft position sensor with the bolt (for exhaust camshaft side).
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  Fig 3: Locating Camshaft Position Sensor Bolt (For Exhaust Camshaft Side)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Connect the 3 engine wire harness clamps and duty vacuum switching connector (for exhaust camshaft side).
INSPECT FOR OIL LEAK
INSTALL NO. 2 CYLINDER HEAD COVER (See INSTALLATION )