Crankshaft Position Sensor: Inspection

INSPECT CRANKSHAFT POSITION SENSOR

Measure the resistance according to the value(s) in the table below.

Standard resistance

RESISTANCE SPECIFICATION

Tester Connection	Condition	Specified Condition
1 - 2	20°C	1850 to 2450 Ω

HINT:

In the table above, the terms Cold and Hot refer to the temperature of the coils. Cold means approximately -10 to 50°C (14 to 122°F). Hot means approximately 50 to 100°C (122 to 212°F). If the resistance is not as specified, replace the crankshaft position sensor.

Fig 1: Measuring Resistance Between Crankshaft Position Sensor Terminals