Crankshaft Position Sensor: Installation

1. Apply a light coat of engine oil to the O-ring on the crankshaft position sensor.
   Fig 1: Locating O-Ring On Crankshaft Position Sensor

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the crankshaft position sensor with the bolt.

   Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

   Fig 2: Locating Crankshaft Position Sensor Bolt

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the crankshaft position sensor connector.

Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)