LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2008 >> xD Standard >> Repair and Diagnosis >> Engine Performance >> 2ZR-FE Engine Control System >> ECM >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

2ZR-FE Engine Control System: ECM: Removal

NOTE: Replace the ECM with a new one if necessary.
  1. REMOVE FRONT WIPER ARM HEAD CAP  (See REMOVAL )
  2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH  (See REMOVAL )
  3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH  (See REMOVAL )
  4. REMOVE HOOD TO COWL TOP SEAL  (See REMOVAL )
  5. REMOVE COWL TOP VENTILATOR LOUVER RH  (See REMOVAL )
  6. REMOVE COWL TOP VENTILATOR LOUVER LH  (See REMOVAL )
  7. REMOVE FRONT WIPER MOTOR AND LINK  (See REMOVAL )
  8. REMOVE FRONT AIR SHUTTER SEAL RH  (See REMOVAL )
  9. REMOVE OUTER COWL TOP PANEL  (See REMOVAL )
  10. REMOVE ECM 
    1. Remove the 2 lock knobs and harness clamp.
    2. Disconnect the 2 ECM connectors.
      Fig 1: Disconnecting ECM Connectors
      G05398744Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the bolt and 2 nuts and remove the ECM.
      Fig 2: Locating ECM Bolt And Nuts
      G05398745Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE ECM BRACKET 
    1. Remove the 2 screws and the ECM bracket.
      Fig 3: Locating ECM Bracket Screws
      G04828455Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  12. REMOVE NO. 2 ECM BRACKET 
    1. Remove the 2 screws and the No. 2 ECM bracket.
      Fig 4: Locating No 2 ECM Bracket Screws
      G04828454Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals