LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2008 >> xD Standard >> Repair and Diagnosis >> Engine Performance >> 2ZR-FE Engine Control System >> Heated Oxygen Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Heated Oxygen Sensor: Removal

  1. REMOVE SHIFT LEVER KNOB SUB - ASSEMBLY (for Manual Transaxle)  (See REMOVAL )
  2. REMOVE UPPER CONSOLE PANEL  (See REMOVAL )
  3. REMOVE REAR CONSOLE BOX COVER  (See REMOVAL )
  4. REMOVE CONSOLE BOX CARPET  (See REMOVAL )
  5. REMOVE REAR CONSOLE BOX SUB - ASSEMBLY  (See REMOVAL )
  6. REMOVE FRONT CONSOLE BOX  (See REMOVAL )
  7. REMOVE HEATED OXYGEN SENSOR 
    1. Disconnect the heated oxygen sensor connector.
      2. Fig 1: Locating Heated Oxygen Sensor Connector
      G05398807Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the grommet and pull the sensor connector out of the cabin through the floor panel.
    3. Remove the wire harness clamp bracket.
      Fig 2: Locating Wire Harness Clamp Bracket
      G05398808Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Using SST, remove heated oxygen sensor.

      SST 09224-00010 

      Fig 3: Removing Heated Oxygen Sensor
      G05398809Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals