2AZ-FE Charging: Generator: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE FRONT FENDER APRON SEAL RH
1. Remove the 2 screws, 3 clips and apron seal.
  
  Fig 1: Identifying Apron Seal With Clips And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FAN AND GENERATOR V BELT (See REMOVAL )
REMOVE GENERATOR ASSEMBLY
1. Disconnect the generator connector.
2. Remove the terminal cap.
3. Remove the nut and disconnect the generator wire.
4. Remove the 2 wire harness clamps.
  
  Fig 2: Identifying Wire Harness Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Remove the 2 bolts and generator.
  
  Fig 3: Identifying Bolts And Generator
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. Remove the bolt and wire harness clamp bracket.
  
  Fig 4: Identifying Bolt And Wire Harness Clamp Bracket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002