LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2009 >> tC Automatic >> Repair and Diagnosis >> Engine Performance >> 2AZ-FE Engine Control System >> Ignition Relay No. 1 >> On-Vehicle Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

On-Vehicle Inspection

  1. REMOVE RELAY (Marking: IG1) 
    1. Remove the IG1 relay from the instrument panel junction block.
  2. INSPECT RELAY 
    1. Measure the IG1 relay resistance.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Specified Condition
      3-5 10 kΩ or higher
      3-5 Below 1 Ω (when battery voltage is applied to terminals 1 and 2)

      If the result is not as specified, replace the relay.

      Fig 1: IG1 Relay Circuit
      G05183857Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL RELAY 
scientia non olet · About LEMON Manuals