LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2009 >> tC Automatic >> Repair and Diagnosis >> Engine Performance >> Ignition System >> 2AZ-FE Ignition >> Ignition Coil >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Coil: Installation

  1. INSTALL IGNITION COIL ASSEMBLY 
    1. Install the 4 ignition coil with the 4 bolts.

      Torque: 9.0 N*m (90 kgf*cm, 80 in.*lbf) 

      Fig 1: Locating Ignition Coil With Bolts
      G05538683Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the 4 ignition coil connectors.
      3. Fig 2: Locating Ignition Coil Connectors
      G05538682Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL ENGINE COVER  (See INSTALLATION )
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  4. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals