LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2009 >> tC Standard >> Repair and Diagnosis >> Engine Performance >> 2AZ-FE Engine Control System >> Ignition Relay No. 2 >> On-Vehicle Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

On-Vehicle Inspection

  1. REMOVE IG2 RELAY (Marking: IG2) 
    1. Remove the engine room relay block cover.
    2. Remove the IG2 relay from the engine room relay block.
  2. INSPECT IG2 RELAY 
    1. Measure the EFI relay resistance.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Specified Condition
      3-5 10 kΩ or higher
      3-5 Below 1 Ω (when battery voltage is applied to terminals 1 and 2)

      If the result is not as specified, replace the relay.

      Fig 1: IG2 Relay Circuit
      G05183858Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL IG2 RELAY 
scientia non olet · About LEMON Manuals