Ignition Coil And Spark Plug: Installation

INSTALL SPARK PLUG
1. Install the 4 spark plugs.
  Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)
  
  Fig 1: Locating Ignition Coil Connectors Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL IGNITION COIL ASSEMBLY
1. Install the 4 ignition coils with the 4 bolts.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  NOTE: Do not damage the rubber ignition coil tips when installing the ignition coils.
2. Connect the 4 ignition coil connectors.
  
  Fig 2: Locating Ignition Coil Connectors Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the camshaft timing oil control valve connector.
  
  Fig 3: Locating Camshaft Timing Oil Control Valve Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 2 CYLINDER HEAD COVER
1. Engage the 4 fittings shown and install the No. 2 cylinder head cover by applying pressure to it.
  HINT:
  
  Make sure that the oil filler cap and the engine oil level dipstick are correctly installed before installing the No. 2 cylinder head cover.
  
  Fig 4: Identifying No. 2 Cylinder Head Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002