Customize Parameters
- CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM
HINT:
The following items can be customized.
NOTE:- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
- Customizing with the Techstream
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the Techstream on.
- Enter the following menus: Customize Setting / Door Lock.
Display Default Content Setting Relevant ECU Unlock Key Twice ON Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once, and unlocks all doors (including the back door) when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors (including the back door). ON or OFF Main body ECU (multiplex network body ECU) Auto Lock OFF Function that locks all doors (including the back door) when the vehicle speed reaches a certain level. ON or OFF Main body ECU (multiplex network body ECU) Auto Lock/Shift* ON Function that locks all doors (including the back door) when the shift lever is moved from P to any position other than P while the engine is running and all doors (including the back door) are closed. ON or OFF Main body ECU (multiplex network body ECU) Auto Unlock/Shift* ON Function that unlocks all doors (including the back door) when the shift lever is moved to P from any position other than P while the ignition switch is ON. ON or OFF Main body ECU (multiplex network body ECU) All Unlock/Open-Close OFF Function that unlocks the other doors when the driver side door is opened within 10 seconds after the ignition switch is turned off. ON or OFF Main body ECU (multiplex network body ECU) - *: for Automatic Transaxle