LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2011 >> xB Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Camshaft Position Sensor >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Removal: Removal

  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY  Refer to 2
  2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH NO. 1 AIR CLEANER HOSE  Refer to 3
  3. REMOVE CAMSHAFT POSITION SENSOR 
    Fig 1: Identifying Camshaft Position Sensor Connector And Bolt
    GTY160931Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the sensor connector.
    2. Remove the bolt and sensor.
scientia non olet · About LEMON Manuals