Removal & Installation
WARNING: This page is about the xB Automatic Trans, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Automatic Trans | 7.3 | C | ||
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| Automatic Trans | 0.2 | C | ||
| Combination Procedure: CONVERTER SEAL: Remove & Replace: | ||||
| Automatic Trans, w/Converter Removed | 0.2 | B | ||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| Automatic Trans, Rear | 0.4 | B | ||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| Automatic Trans | 0.2 | C | ||
| Combination Procedure: OUTPUT SEAL: Remove & Replace: | ||||
| Automatic Trans, Each | 0.2 | B | ||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| Automatic Trans | 0.1 | C | ||
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: | ||||
| Automatic Trans | Includes: Programming. | 0.8 | C | |
| Combination Procedure: TRANSAXLE OIL COOLER: Clean: | ||||
| Automatic Trans | 0.5 | C | ||