DTC U0452-68: Invalid Data Received From Restraints Control Module Event Information [07/2015 - ]: Procedure
- VERIFY MAIN BODY ECU DTCS AGAIN
- Clear the DTC for the main body ECU using the Techstream.
Refer to DTC CHECK / CLEAR [07/2015 - ]
Body Electrical > Body Control Module > Clear DTCs
- Switch the ignition ON (engine off or on) and wait for 3 s or more.
- Retrieve the main body ECU DTCs using the Techstream.
Refer to DTC CHECK / CLEAR [07/2015 - ]
Body Electrical > Body Control Module > Trouble Codes
- Is the same DTC displayed?
Result
Result Yes No
Result: 2
No
See step 5
Result: 1
Yes
See step 2
- Clear the DTC for the main body ECU using the Techstream.
- VERIFY CENTER AIRBAG SENSOR ASSEMBLY DTCS
- Retrieve the center airbag sensor assembly DTCs using the Techstream.
Refer to DTC CHECK / CLEAR [07/2015 - ]
Body Electrical > Restraint Control Module > Trouble Codes
- Are any other DTCs displayed?
Result
Result Yes No
Result: 2
Yes
REPAIR OR REPLACE THE MALFUNCTIONING PART ACCORDING TO THE APPLICABLE DTC TROUBLESHOOTING.
Result: 1
No
See step 3
- Retrieve the center airbag sensor assembly DTCs using the Techstream.
- VERIFY IF MALFUNCTIONING LOCATION IS CENTER AIRBAG SENSOR ASSEMBLY DEPENDING ON REPEATABILITY
- Clear the DTC for the main body ECU using the Techstream.
Refer to DTC CHECK / CLEAR [07/2015 - ]
Body Electrical > Body Control Module > Clear DTCs
- Switch the ignition ON (engine off or on) and wait for 3 s or more.
- Retrieve the main body ECU DTCs using the Techstream.
Refer to DTC CHECK / CLEAR [07/2015 - ]
Body Electrical > Body Control Module > Trouble Codes
- Is the same DTC displayed?
Result
Result Yes No
Result: 1
Yes
See step 7
Result: 2
No
See step 5
- Clear the DTC for the main body ECU using the Techstream.
- VERIFY THAT REPAIRS HAVE BEEN COMPLETED
- Clear the DTC for the main body ECU using the Techstream.
Refer to DTC CHECK / CLEAR [07/2015 - ]
Body Electrical > Body Control Module > Clear DTCs
- Switch the ignition ON (engine off or on) and wait for 3 s or more.
- Retrieve the main body ECU DTCs using the Techstream.
Refer to DTC CHECK / CLEAR [07/2015 - ]
Body Electrical > Body Control Module > Trouble Codes
- Is the same DTC displayed?
Result
Result Yes No
Result: 2
Yes
See step 6
Result: 1
No
See step 5
- Clear the DTC for the main body ECU using the Techstream.
- VERIFY IF OTHER DTCS DISPLAYED
Result: 1
Yes
REPAIR OR REPLACE THE MALFUNCTIONING PART ACCORDING TO THE APPLICABLE DTC TROUBLESHOOTING.
Result: 2
No
DTC TROUBLESHOOTING COMPLETED.
- REPEAT THE INSPECTION FROM STEP 1.
- If the malfunction recurs, replace the main body ECU.
Refer to REMOVAL [07/2015 - ]
- Go to the next step.
Result
Proceed to NEXT
Result: 1
NEXT
See step 5
- If the malfunction recurs, replace the main body ECU.
- REPLACE THE CENTER AIRBAG SENSOR ASSEMBLY, THEN GO TO THE NEXT STEP.
- Refer to REMOVAL [07/2015 - ]
Result
Proceed to NEXT
Result: 1
NEXT
See step 4
- Refer to REMOVAL [07/2015 - ]